CPD 10



Full Range 10" + 1,4"


CPD 10 back(1)

CPD 10(1)

Live Stage Music
Delay system
Compact pa system
Theatrical application
Multi Zone
  Houses of worship
Piano Bar
  Under Balcony Cabaret



CPD 10 complements the KS AUDIO CPD-Series of DSP controlled active self-powered systems with the unique directivity of HDSP technology, resulting in the highest sound pressure level even in the lower frequency range while simultaneously having the lightest weight possible. The DSP-Controller operates with KS Audio FIR-Filter technology for true impulse-correct reproduction of audio. There are two integrated amplifiers – 800W RMS for the 10”-low-mid speakerand 200W RMS for the 1.4” driver - with a peak performance of 2 KW!


The unique sound dispersion design of the HDSP HF horn and its electronic blending with the low-mid speaker is unique. The HDSP design results in multiple integrated dispersion angles that widen downwards towards the near field of the speaker while maintaining tight pattern control and long throw capability. The vertical bending of the HF wave front continues through the cut-off frequency as well as the crossover frequency, without any variance in the frequency response.

This means that with a standard two-speaker setup, the audience in close proximity to the speakers will enjoy the same audio quality and definition as those further away.

The electronics are comprised of a switch mode power supply with Power-factor-Correction, a “cold” PWM amplifier for LF performance, and an analog FET-amplifier with the best audio characteristics for the HF compression Driver. Both the 10”- long excursion low-mid speaker and the 1.4” compression driver have strong but light Neodymium-Magnets. The 3” membrane of the compression driver consists of a special material having a clearly reduced distortion factor in comparison to a titanium membrane. With CPD 10, KS AUDIO has responded to the demanding needs of the professional user with a modular self-powered loudspeaker producing the highest audio quality in a compact size. There are many applications in which the CPD 10 can be used: Theatre, Live-stage Music, in large rooms or tents, as a delay system for long throw, or as a compact top used with any KS AUDIO subwoofer. We recommend the CPD W1 Sub.

The speaker cabinet construction is, like any KS AUDIO system, built from birch plywood with an extremely durable PU-coating. All RAL colors available. Another special feature is the modular rigging option. Allowing the installation of different fly-ware and connectors, which are safely interlocked by means of quick release pins. There is a pole mount in the bottom of the cabinet and a protective steel grill on the front, with or without acoustic foam, are further features of this premium product. The rear mounted 2-way DSP-controller / amplifier operates very efficiently without the need of a cooling fan. The FIR crossover and filter are specially matched to the drivers, with corresponding compressors and limiters to ensure safe operation. The electronically balanced inputs are XLR F+M connectors. The control panel also has a digital volume control to individually adjust for each venue and a digital delay reaching up to 48 m for decentralized PA systems. There is a Lo Cut switch for speech reproduction or for adding a subwoofer to the system. Operation and set-up with a PC using KS AUDIO REMOTE3 Software is also possible over an Ethernet connection.

The power supply on the CPD 10 operates on AC 110-240V with soft-start using a PowerCon connector.




Specifications CPD 10
frequency response + / -3dB 68-19000Hz +
output SPL 136dB peak
dispersion asymm. 60°-120°/35°
integrated amplifier / system controller type Class-D fullbridge, FET-Amp
drivers 10”-cone ND, 1,4”-driver ND
power in Wrms (AES standard) 500W + 100W
amplification / x-over 2-way DSP processing, FIR
input connectors XLR3, powercon input (100/250VAC), ethernet
output connectors XLR3 - thru
cabinet birch plywood
grill stainless steel honeycomb 6 sided + acoustic foam
finish charcoal black polyurethane
dimensions (height x width x depth) 516 x 298 x 351mm 20.30“ x 11.7“ x 13.8“
weight (without options) 18 kg 39.7 lbs
features integrated digital delay with display
35mm pole mount
options mounting frame heavy duty padded black cover





Montagerahmen CPD 10 dreh+neigbar incl. 2 Kugelsperrbolzen
Flugbügel CPD 10 für Einzel und Paaraufhängung incl. 2
Schutzhülle mit Verstärkerschutz für CPD10/C 10
Schrägsteller CPD 10 Paar für Monitorbetrieb incl. 2 Kugelsperrbolzen



90.518 MR CPD 10

90.522 RIG CPD 10 98.100 CPD 10 90.521 Rig CPD 10 V  



Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.

Wir nutzen Cookies auf unserer Website. Einige von ihnen sind essenziell für den Betrieb der Seite, während andere uns helfen, diese Website und die Nutzererfahrung zu verbessern (Tracking Cookies). Sie können selbst entscheiden, ob Sie die Cookies zulassen möchten. Bitte beachten Sie, dass bei einer Ablehnung womöglich nicht mehr alle Funktionalitäten der Seite zur Verfügung stehen.